Ro purifier:RO problems that need your attention
RO system is totally ideal and a healthy way to achieve a level of your drinking water purity that makes it healthy for drinking and cooking process as compared to normal tap water.RO filter removes all the unwanted pollutants from general water and flush all the impurities away.
A RO system contains a cold-water valve which takes water from external sources and will supply water for the system. The cold then travels towards the pre-filter process which gets rid of sediments and impurities. The RO membrane is the most important part of the system. It allows the filtration process to take place.
Following are listed some of the basic problems of RO along with their solutions.
- Taste and smell the RO purifier water: if your water coming from outlet is having bad smell or having and test this denotes that your filters are having problem and it’s good time to change them
- Water flow or pressure- if you are observing a water outlet is having slower speed than normal this is because ill-fitted O ring around the faucet. This ring is a soft ring shaped tube fitted around that stops leakage of water and keeps it intact. If you are not having much idea you can call RO services to get them fixed.
- RO water tank taking too long to fill up- This is the most common problem for the RO purifiers. You will observe either your tank is not filling or filling slowly. This is due to low slow filling of water pressure.
- Unusual vibrations and noise in RO purifiers- this is also the most common problem of RO and this also may be due to low pressure.
- Wastewater volume in excess- this problem is due to defects In membrane and may be due to clogged or damaged membrane. The only solution is maintenance and regular checkup of your RO system